[:es]
Pintura plástica para interior – exterior
V/64 es una pintura a base de emulsiones de copolímeros acrílicos, bióxido de titanio, extenders, cargas seleccionadas y aditivos escogidos para obtener un producto con un buen poder cubriente, resistente al exterior por su gran dureza y poder impermeabilizante, de gran blancura y rendimiento.
Color | Blanco. |
Acabado | Mate. |
Peso específico | 1,71 gr./cc. +/- 0,05 |
Viscosidad al envasar | 115 K.U. a 25º C +/- 5 |
Materia fija % | 71% +/- 2 |
Sólidos en volumen % | 42 % +/- 2 |
Rendimiento | 5 a 6 m2/kg por mano y dependiendo del estado del paramento |
Espesor húmedo recomendado | 100-110 micras por mano |
Espesor seco recomendado | 40-45 micras por mano |
Tiempo de secado al tacto | 40 a 60 minutos |
Curado total | 21 días |
Repintado | 6 – 8 horas mínimo, máximo sin limite |
Diluyente | Agua dulce |
Presentación | Envases de 1, 5, 10 y 23 kg |
Conservación | Mantener al abrigo de temperaturas extremas |
COV´S | Cat A/a (límite legal 30 g/l). Contenido máximo 25 g/l |
Se puede aplicar sobre cualquier material de construcción: yeso, cemento, escayola, etc. Su aplicación puede ser a brocha, rodillo o proyectado a pistola. Antes de su aplicación, el paramento debe estar completamente limpio y seco.
Primera mano: diluir con agua entre 15-20%; segunda mano y sucesivas: diluir entre 8-10%.
No se debe aplicar a temperaturas ambientes ni de soporte inferiores a 5º C o superiores a 35º C y siempre 2-3º C por encima de la temperatura de rocío.
Primera mano: diluir con agua entre 15-20%; segunda mano y sucesivas: diluir entre 8-10%.
No se debe aplicar a temperaturas ambientes ni de soporte inferiores a 5º C o superiores a 35º C y siempre 2-3º C por encima de la temperatura de rocío.
Otra Información
![]() | ![]() | ![]() |
Colores según muestra bajo pedido mínimo de 400 kg.
[:en]
Acrylic Paint for Interior-Exterior
Our paint V/64 is an acrylic paint formulated with acrylic copolymers, titanium dioxide, extenders, selected fillers and chosen additives. It is designed to obtain a product with good opacity, good resistance to weather due to its hardness and waterproof qualities. It provides high whiteness and performance.
Colour | White |
Finish | Matt |
Specific weight | 1,71 gr./cc. +/- 0.05 |
Viscosity at time of packaging | 115K.U. at 25º C +/- 5 |
Fixed matter % | 71 % +/- 2 |
Volume solids % | 42 % +/- 2 |
Performance | 5 – 6 m2/kg per coat depending of the state of the surface |
Wet film recommended thickness | 100-110 micras per coat |
Dry film recommended thickness | 40-45 micras per coat |
Dry-to-touch time | 40 – 60 minutes |
Curing time | 21 days |
Recoat | 6 – 8 hours minimum. Maximum without limit |
Thin with | Clean water |
Presentation | 1, 5, 10 and 23 kg cans |
Conservation | Keep away from extreme temperatures |
VOC’s | Cat A/a (legal limit 30 g/l). Maximum content 25 g/l |
It can be applied on any building material, plaster, cement, etc. It can be applied by brush, roller or spray. Before application, the surface must be completely clean and dry.
First coat should be thinned with 15-20% of clean water, and the second with 8-10%.
Do not apply when air and surface temperatures are below 5° C or above 35º C and always 2-3°C above the dew temperature.
First coat should be thinned with 15-20% of clean water, and the second with 8-10%.
Do not apply when air and surface temperatures are below 5° C or above 35º C and always 2-3°C above the dew temperature.
Other Information
![]() | ![]() | ![]() |
Other colours available with minimum order of 400 kg.
[:fr]
Peinture Acrylique pour Intérieur-Extérieur
V/64 est une peinture basée en émulsions de copolymères acryliques, dioxyde de titane, hampes, certaines charges et additifs sélectionnés pour obtenir un produit avec une bonne opacité, résistant à l’extérieur dû à sa grande dureté, et à son pouvoir imperméabilisant. Elle fournit haute blancheur et rendement.
Couleur | Blanche |
Finition | Mate |
Poids spécifique | 1,71 gr./cc. +/- 0,05 |
Viscosité au moment du conditionnement | 115K.U. à 25º C +/- 5 |
Champ fixe % | 71 % +/- 2 |
Solides en volume % | 42 % +/- 2 |
Rendement | 5 – 6 m2/kg par couche et selon l’état de la surface |
Épaisseur humide recommandée | 100-110 microns par couche |
Épaisseur sèche recommandée | 40-45 microns par couche |
Temps de séchage au toucher | 40 – 60 minutes |
Durcissement total | 21 jours |
Repeindre | 6 – 8 heures minimum, maximum sans limite |
Diluant | Eau douce |
Conditionnement | Pots de 1 kg, 5 kg, 10 kg et 23 kg |
Conservation | Tenir à l’écart des températures extrêmes |
COV´S | Cat A/a (limite légal 30 g/l). Contenu maximal 25 g/l |
Il peut être appliqué sur n’importe quel matériel de construction: plâtre, ciment, etc. Votre application peut être à la brosse, rouleau ou projeté au pistolet. Avant application, le revêtement doit être complètement sec et propre.
La première couche doit être dilué avec un 15% à 20% d’eau. La deuxième couche, diluer en 8 à 10% d’eau.
Il ne devrait pas être appliqué à des températures ambiantes ou du support inférieures à 5° C ou supérieures à 35° C et toujours 2-3° C au-dessus de la température de rosée.
La première couche doit être dilué avec un 15% à 20% d’eau. La deuxième couche, diluer en 8 à 10% d’eau.
Il ne devrait pas être appliqué à des températures ambiantes ou du support inférieures à 5° C ou supérieures à 35° C et toujours 2-3° C au-dessus de la température de rosée.
Pour en savoir plus
![]() | ![]() | ![]() |
Les couleurs sur demande et selon échantillon sont fabriquées en quantité minimale de 400 kg
[:]