[:es]
Revestimiento acrílico de altas prestaciones
Pintura plástica revestimiento especialmente formulada para la decoración y protección de fachadas nuevas y viejas, con un altísimo poder cubriente y excelentes cualidades mecánicas y estéticas.
Se trata de un revestimiento formulado con emulsiones acrílicas puras que le confieren un comportamiento excelente sobre cualquier paramento y una altísima durabilidad tanto al cuarteo como al amarillamiento, es permeable a los vapores interiores e impermeable a los exteriores por su contenido en aditivos hidrofugantes.
Color | Blanco |
Acabado | Mate |
Peso específico | 1,66 gr./cc. |
Viscosidad | 110 K.U. a 25º C |
Materia fija | 69 % |
Rendimiento | 8 a 10 m2/Kg. |
Tiempo de secado al tacto | 1 hora. |
Repintado | 8 horas |
Diluyente | Agua. |
Presentación | Envases de 23 Kgs. |
Conservación | Mantener al abrigo de temperaturasextremas. |
Es un producto igualmente indicado en exteriores como en interiores, puede aplicarse sobre cemento, yeso, hormigón, ladrillo, piedra, etc. Su aplicación puede ser a brocha, rodillo o proyectado a pistola. Los paramentos a pintar deberán estar limpios y secos no debiendo aplicar a temperaturas inferiores a 5 ºC o superiores a 35 ºC.
Otra Información
![]() | ![]() [formlightbox_obj id=”2″ style=”padding: 10px;”] | ![]() |
Colores según muestra bajo pedido mínimo de 400 Kgs.
[:en]
High performance acrylic coating
Plastic paint coating especially formulated for decoration and protection of new and old facades. It has a high power hiding and excellent mechanical and aesthetic qualities.
It is a coating formulated with pure acrylic emulsions that give an excellent performance on any facings and a high durability to the cracking and yellowing, It is permeable to interior vapours and impermeable to exterior thanks to its water repellents additives.
Colour | White |
Finish | Matt |
Specific weight
| 1,66 gr./cc. |
Viscosity
| 110 K.U. à 25º C |
Volume solids
| 69 % |
Coverage | 8 à 10 m2/Kg. |
Drying time to the touch
| 1 hour. |
Repainting | 8 hours. |
Thinner | Water. |
Pack sizes
| 23 Kgs. |
Conservation | Keep protected from extreme temperatures. |
It is indicated for both outdoors and indoors. It can be applied to cement, plaster, concrete, brick, stone, etc. The application can be made by brush, roller or projected to gun. Walls to be paint must be clean and dry and must not apply at temperatures below 5 ° C or higher than 35 ° C.
Other Information
![]() | ![]() | ![]() |
Colours according to sample under minimal order of 400 Kgs.
[:fr]
Revêtement acrylique de hautes prestations
Peinture plastique de revêtement spécialement formulée pour le revêtement , la décoration et la protection des façades nouvelles ou anciennes; à très haut pouvoir couvrant et des excelentes qualités mécaniques et esthétiques.
Il s’agit d’un revêtement formulé avec des émulsions acryliques pures qui lui confèrent un comportement excellent sur n’importe quel parement et une très haute durabilité face au craquèlement et au jaunissement, il est perméable aux vapeurs intérieurs et impermeable à ceux de l’extérieur parce qu’il contient des additifs hidrofugants.
Couleur | Blanc |
Aspect du produit sec | Mat |
Poids volumique | 1,66 gr./cc. |
Viscosité | 110 K.U. à 25º C |
Extrait sec | 69 % |
Rendement en surface | 8 à 10 m2/Kg. |
Temps de séchage au toucher | 1 heure. |
Recouvrable | 8 heures. |
Diluant | Eau. |
Conditionnements | 23 Kgs. |
Conservation | À l’abri des temperatures extrêmes. |
C’est un prodduit aproprié pour intérieur et extérieur. Il peut être appliqué sur ciment, plâtre, béton, briue, pierre,etc. Appliquez à la brosse, au rouleau ou au pistolet. Les perements à peindre devront être propres et secs. Ne pas utiliser à des températures inférieures à 5ºC ou supérieures à 35ºC.
Pour en savoir plus
![]() | ![]() [formlightbox_obj id=”2″ style=”padding: 10px;”] | ![]() |
Couleurs sous commande d’une quantité minimum de 400 kg.
[:]