[:es]
Pintura blanca interior – exterior
Pintura blanca mate especialmente formulada para decoración tanto interior como exterior, con un perfecto equilibrio entre cargas y emulsiones que le confieren alta transpirabilidad y una buena resistencia al frote. Posee una excelente blancura, buen poder cubriente en seco y buena aceptación de color.
Color | Blanco |
Acabado | Mate |
Peso específico | 1,72 +/- 0.05 gr./cc. |
Viscosidad al envasar | 105 K.U. a 25º C |
Materia fija | 70% |
Rendimiento | 5 a 6 m2/Kg. |
Tiempo de secado | 1 a 2 horas. |
Repintado | 10 a 12 horas |
Diluyente | Agua, por lo que se considera ignífugo. |
Presentación | Envases 23 Kgs. |
Conservación | Mantener al abrigo de temperaturas extremas. |
Se puede aplicar sobre cualquier material de construcción, yeso, cemento, escayola, etc. Su aplicación puede ser a brocha, rodillo, proyectado a pistola o airless, etc. Antes de su aplicación el paramento debe estar completamente limpio y seco. No se debe aplicar a temperaturas inferiores a 5 ºC o superiores a 35 ºC.
- Remover hasta homogeneización del producto.
- Es recomendable aplicar una primera mano diluida con 10-15% de agua si se utiliza brocha o rodillo y 20-25% si la aplicación es con pistola aerográfica.
- No aplicar en el exterior si se prevé lluvia en las siguientes 12 horas.
- Limpiar las herramientas con agua inmediatamente después de su uso.
Otra Información
![]() | ![]() | ![]() |
Colores según muestra bajo pedido mínimo de 400 Kgs.
[:en]
Acrylic Paint for indoor and outdoor
Colour | White |
Finish | Matt |
Specific weight | 1,71 +/-0,05 gr./cc. |
Viscosity at time of packaging | 105 K.U. at 25º C |
Fixed material % | 71% +/- 5 |
Solid on volume % | 42% +/- 5 |
Performance | 5 – 6 m2/kg per coat depending of the state of the surface |
Drying time at touch | 1 – 2 hours |
Treat | 21 days |
Repainting | 10 – 12 hours minimum, maximum without limit |
Diluent | Fresh water |
Packaging | 5 Kg. and 23 Kg. containers |
Conservation | Keep away from extreme temperatures |
COV’S | Cat A/a (legal limit 30 g/l) max. cont. 25 g/l |
It is recommended to apply a first layer of diluted with 10-15% of water using brush or roller and 20-25% if the application is with “Airless”. Do not apply outside if rain is expected within 12 hours. Clean tools with water immediately after use.
Other Information
![]() | ![]() | ![]() |
Colours according to sample under minimal order of 400 Kgs.
[:fr]
Peinture Acrylique pour Intérieur et Extérieur
Couleur | Blanche |
Aspect du produit sec | Mat |
Poids volumique | 1,71 +/- 0.05 gr./cc. |
Viscosité au moment du conditionnement | 105 K.U. à 25º C |
Champ fixe % | 71% +/- 5 |
Solides en volume % | 42% +/- 5 |
Rendement | 5 – 6 m2/kg par couche et selon l’état de la surface |
Temps de séchage au toucher | 1 – 2 heures |
Durcissement | 21 jours |
Recouvrable | 10 – 12 heures minimum, maximum sans limite |
Diluant | Eau douce |
Presentation | Pots en 5 et 23 Kg. |
Conservation | Tenir à l’écart des températures extrêmes. |
COV’S | Cat A/a (limite légal 30 g/l) Contenu maximal 25 g/l |
Remuer jusqu’à homogénéisation du produit. Il est recommandé d’appliquer une première couche de diluée avec 10 à 15 % de l’eau à l’aide de pinceau ou de rouleau et de 20 à 25 % si la demande est, avec l’aérographe. Ne s’appliquent pas à l’extérieur si la pluie est attendue dans les 12 heures. Nettoyer l’outillage avec de l’eau immédiatement après utilisation.
Pour en savoir plus
![]() | ![]() | ![]() |
Couleurs sous commande d’une quantitè minimum de 400 kg.
[:]