[:es]
Pintura plástica blanco profesional
M-15 interior-exterior, es una pintura a base de emulsiones copolímeras acrílicas, bióxido de titanio y otras materias primas seleccionadas. Posee un buen poder de cubrición, es resistente al exterior. Se caracteriza por su gran blancura en seco y rendimiento, buena brochabilidad.
Color | Blanco |
Acabado | Mate |
Peso específico | 1,71 gr/cc. |
Viscosidad | 115 K.U. a 25 º |
Materia fija | 71 % |
Rendimiento | 5 a 6 m2/kg. |
Resistencia al frote | A los 21 días. Dobles pasadas – 1100 |
Tiempo de secado | 40 a 60 minutos. |
Repintado | 10 a 15 horas. |
Diluyente | Agua, por lo que se considera ignífugo. |
Presentación | Envases de 5 a 23 Kg. |
Conservación | Mantener al abrigo de temperaturas extremas. |
Se puede aplicar sobre cualquier material de construcción, yeso, cemento, escayola, etc. Su aplicación puede ser a brocha, rodillo o proyectado a pistola. Antes de su aplicación el paramento debe estar completamente limpio, teniendo en cuenta que no se debe aplicar a temperaturas inferiores a 5 ºC o superiores a 35 ºC.
Otra Información
![]() | ![]() | ![]() |
Colores según muestra bajo pedido mínimo de 400 Kgs.
[:en]
Professional white plastic paint
M-15 interior – exterior, it is a paint by means of acrylic copolymers emulsions , titanium dioxide and other chosen raw material. It has a good hiding power, it is resistant on the outside. It is characterized by its great whiteness in dry, high performance and good brushability.
Colour | Blanco |
Finish | Mate |
Specific weight | 1,71 gr/cc. |
Viscosity | 115 K.U. at 25 º |
Volume solids | 71 % |
Coverage | 5 to 6 m2/kg. |
Rub resistance | At 21 days. Double coats – 1100 |
Drying time | 40 to 60 minutes. |
Repainting | 10 to 15 hours. |
Thinner | Water, so it is considered fireproof |
Pack sizes | 5 and 23 Kg. |
Conservantion | Keep protected from extreme temperatures |
It can be applied on any building material, plaster, cement, plaster, etc. The application can be by brush, roller or projected to gun. Before application the facing must be completely clean and dry, bearing in mind not to apply at temperatures below 5 °C or higher than 35 °C.
Other Information
![]() | ![]() | ![]() |
Colours according to sample under minimal order of 400 Kgs.
[:fr]
Peinture Acrylique Mate pour Intérieur – Extérieur
La peinture Intérieure-Extérieure M-15 est une peinture en base d’émulsions acryliques copolymères, dioxyde de titane et autres matières premières sélectionnées. Elle a le pouvoir de la bonne couverture, il est résistant à l’extérieur. Il se caractérise par sa grande blancheur sec et les performances, les bon lavage et finition.
Couleur | Blanche |
Finition | Mate |
Poids spécifique | 1,6 gr./cc. |
Viscosité au moment du conditionnement | 110 K.U. à 25 ºC |
Champ fixe | 68 % +/- 2 |
Rendement | 5 – 6 m2 /Kg |
Temps de séchage au toucher | 40 – 60 minutes |
Durcissement | 21 jours |
Recouvrable | 10 – 15 heures |
Diluant | Eau |
Conditionnement | Pots en 5, et 23 Kg. |
Conservation | Tenir à l’écart des températures extrêmes |
La peinture peut être appliqué sur n’importe quel matériau de construction, plâtre, ciment, etc. Votre application peut être à la brousse, rouleau ou projeté au pulvérisateur. Avant application du revêtement doit être complètement sec et propre. Vous ne s’appliquent pas à des températures inférieures à 5°C ou supérieure à 35°C.
Pour en savoir plus
![]() | ![]() | ![]() |
Couleurs sous commande d’une quantitè minimum de 400 kg.
[:]