Total Matt 2.8
Plastic Paint for indoor and outdoor
Deep MATT plastic paint, with maximum opacity, excellent washable, perfect finish, no roll marks or shiny patches, no splashes. Great covering power, high lavability, whiteness and performance.
Specially formulated to minimize imperfections on roof surfaces and walls with indirect lights. Aditivated with fungicide/alligicidas that inhibit the proliferation of mold and verdin.
Specially formulated to minimize imperfections on roof surfaces and walls with indirect lights. Aditivated with fungicide/alligicidas that inhibit the proliferation of mold and verdin.
tr>Solid in volume %40% +/- 2
| Colour | White |
| Finish | Deep matt (< 3 a 85a) UNE-EN 13300 |
| Specific weight | 1,60 +/-0,05 gr./cc. |
| Viscosity on time of packaging | 110 K.U. to 25º C |
| Fixed matter % | 64 % +/- 2 |
| Performance | 8 – 10 m2/kg per coat depending on the state of the surface |
| Wet film recommended thickness | Clase 2 UNE-EN ISO 11998:2017 |
| Dry film recommended thickness | 50 – 60 micron per hand |
| Dry-to-touch time | 40 – 60 minutes |
| Curing time | 21 days |
| Recoat | 4 to 6 hours minimum. Maximum without limit |
| Thin with | Clean water |
| Presentation | 4 and 14lt containers |
| Conservation | Keep away from extreme temperatures |
| VOC’s | Cat A/a (legal limit 30 g/l). Maximum content < 2 g/l |
It can be applied on any material of construction: plaster, cement, brick, stone, etc. It can be applied by brush, roller or sprayed. Surfaces to be painted must be completely clean and dry. Do not apply when air and surface temperatures are below 5° C or above 35º C.
Other Information
 Technical data sheet |
 Safety data sheet
|
 White |
Other colours available with minimum order of 400 kg.
