Elastic coating for vertical facings (smooth and rough)
PAINT UNDERGOING TESTING BY GEOCISA LABORATORIES
It is a special coating for the rehabilitation of buildings, both indoors as outdoors. This product covers defects and small cracks in the facings leaving a smooth or rough finish without joints at the same time that leaves facings completely impervious to rainwater and permeable to interior vapours thanks to their perfect transpiration. It eliminates practically concrete carbonation thanks to its high resistance to the diffusion of carbon dioxide.
| Colour | White |
| Finish | Satin |
| Specific weight
|
1,4 gr./cc. Rough – 1,35 gr/cc. Smooth |
| Viscosity | 130 K.U. at 25º C Rough – 120 K.U 25 ºC Smooth |
| Volume solids
|
66 % |
| Coverage | Smooth 1 to 2 m2/Kg. depending on the facing state. Rough – 3 Kg/m2. depending on the facing state |
| Drying time | To the touch, completely conditioned by the temperature and humidity of the environment. |
| Repainting | At least after 16 to 20 hours- |
| Thinner | Water, so it is considered fireproof. |
| Pack sizes
|
20 Kgs. |
| Conservation | Keep protected from extreme temperatures. |
Remove dust and dirt from the surface to paint. RUGOELAST is supplied ready for use, not being necessary to add water. Not apply if frosts or rains are foreseen within 4 to 6 hours and avoid damp environments.
Other Information
 Technical data sheet |
 Safety data sheet
|
 Certificate
|
 White colour |
Colours according to sample under minimal order of 400 Kgs.
