Acrylic paint Base 3 Satin

Special Acrylic Satin Paint for Dyeing System (Mix machine)

BASE 3 SATIN acrylic paint is formulated with emulsions most advanced and first quality, as well as other raw materials, which gets a great product of high performance, hardness, perfect coverage for its wealth of dioxide of titanium and good resistance to weather and rubbing, by its great amount of emulsion.
BASE 3 SATIN acrylic paint, possesses great flexibility, good adhesion and resistance to the alkalinity of the cement, it is vapor-permeable indoor and waterproof to the outdoor, and also has a great power covering, leaving a perfect finish.
Calibrated and tested for use as opaque base in Pinturas de la Peña dyeing system. It can be used in any other three-base-based dyeing system. (previous tests)

Colour	Transparent
Finishing	Satin
Specific weight	1,26 +/-0,05 gr./cc.
Viscosity at time of packaging	95 K.U. to 25 ºC
Fixed material	50 % +/- 1
Performance	8 – 10 m² /Kg
Drying time at touch	40 – 60 minutes
Treat	21 days
Repainting	4 – 6 hours
Diluent	Water (5 – 10 %)
Packaging	0,85 gr., 4,5 Kg. and 16,65Kg. containers
Conservation	Keep away from extreme temperatures

It is an also indicated product outdoors and indoors, it can be applied to cement, plaster, concrete, brick, stone, etc. It is particularly suitable as TR (transparent) base in any painting system that is based on two or three bases.
Brush, paint roller or “Airless” spray gun. The surfaces must be clean and dry. Don’t apply under temperatures lower than 5ºC or higher than 35ºC.

Other Information