Fixer for poorly adhered limes and facings
Product made with acrylic emulsions emulsified in water, with an excellent penetration and adhesion, not forming film, which solves the problems of the poor adherence in the paintings on supports of construction, interior and exterior.
| Colour | Colourless |
| Finish | Semi-matt |
| Specific weight | 0,90 – 1 gr./cc. |
| Coverage | 10 to 12 m2 / lt. (depending on the surface porosity) |
| Drying time | 40 to 60 minutes to the touch. |
| Washable | 3 to 4 hours. |
| Thinner | Water, so it is considered fireproof. |
| Pack sizes | 1,5 and 25 Lt. |
| Conservation | Keep protected from extreme temperatures. |
PEÑA-FIJ serves as a primer before painting on supports of concrete beads, lightweight concrete, cement, brick and set cal and tempering before painting on them.
On a surface of beads, no paint adheres properly if not primed with PEÑA-FIJ or another clamper.
The surface to be applied must be clean, without dust or grease. It should be diluted with water, adding 4 parts of water and one of Peña-Fij in order to increase penetrability. Application may be by brush, roller or spray.
Do not apply at temperatures below 5 ° C or above 35 ° C.
On a surface of beads, no paint adheres properly if not primed with PEÑA-FIJ or another clamper.
The surface to be applied must be clean, without dust or grease. It should be diluted with water, adding 4 parts of water and one of Peña-Fij in order to increase penetrability. Application may be by brush, roller or spray.
Do not apply at temperatures below 5 ° C or above 35 ° C.
Other Information
 Technical data sheet |
 Safety data sheet
|
 Colourless |
Colours according to sample under minimal order of 400 Kgs.
