Waterborne Paint Specially for Floors and Sports Grounds
Waterborne paint made with acrylic emulsions, which allow to obtain a product of great flexibility and resistance to abrasion and weather, with the advantages of having water as a solvent. It is specially formulated for the decoration of walls horizontal as sports grounds and cycling routes.
| Colour | Turkish red, Fronton green and Floors grey |
| Finishing | Matt medium |
| Specific weight | 1’55 +/- 0,05 gr. / cc. |
| Viscosity at time of packaging | 100 K.U. to 20ºC |
| Fixed material% | 67% +/- 5 |
| Solid on volume% | 43% +/- 5 |
| Performance | 5 – 6 m2 /Kg per coat depending the state of the surface |
| Minimum dry thickness | 41-45 microns per coat |
| Drying time at touch | 2 – 3 hours |
| Total treat | 21 days |
| Repainting | 5 – 6 hours |
| Diluent | Water |
| Packaging | 1 Kg., 5 Kg and 23 Kgs. containers |
| Conservation | Keep away from extreme temperatures |
| COV’S | Cat A/c (legal limit 40 g/l) max. cont. 25 g/l |
It can be applied by brush, roller or pistol (with or without air), it is necessary minimum two coats for normal use, there must be an increase in the number of coats if you want an intensive use.
New or old surfaces unpainted: they must be washed with a dilution of the 10% hydrochloric acid in water, and then enough rinse with water, dry at least two days.
On the painted surfaces, components must be removed to be treated subsequently as in the previous case.
On old paint surfaces: remove paint, remove the parts soft and crumbly, properly sealed with acrylic fixative PENAFIJ and proceed as indicated in the new surfaces.
Metal surfaces should be coated with a chlorinated rubber primer. On the prepared surface, apply a first coat of PEÑA-SPORT diluted to 10% water with the following coats, and apply directly with the product it’s use.
It is not recommended to apply the paint to temperatures below 5°C or higher than 35°C or on wet surfaces or too heated by the sun. In all cases, the surfaces must be clean of dirt and fully consolidated.
New or old surfaces unpainted: they must be washed with a dilution of the 10% hydrochloric acid in water, and then enough rinse with water, dry at least two days.
On the painted surfaces, components must be removed to be treated subsequently as in the previous case.
On old paint surfaces: remove paint, remove the parts soft and crumbly, properly sealed with acrylic fixative PENAFIJ and proceed as indicated in the new surfaces.
Metal surfaces should be coated with a chlorinated rubber primer. On the prepared surface, apply a first coat of PEÑA-SPORT diluted to 10% water with the following coats, and apply directly with the product it’s use.
It is not recommended to apply the paint to temperatures below 5°C or higher than 35°C or on wet surfaces or too heated by the sun. In all cases, the surfaces must be clean of dirt and fully consolidated.
Other Information
 Technical data sheet |
 Safety data sheet
|
 Colour card |
Colours according to sample under minimal order of 400 Kgs.
