Matt Plastic Paint indoors and outdoors
Interior-Exterior matte plastic formulated with acrylic copolimeras emulsions with a good balance between opacity flexibility and finish both in white and in colors. It is permeable to interior vapors and impervious to exteriors.
Suitable for the decoration and protection of masonry surfaces in general, both interior and exterior wich are not problematic.
Suitable for the decoration and protection of masonry surfaces in general, both interior and exterior wich are not problematic.
PackagingCans of 14 liters
| Color | White |
| Finish | Matt |
| Specific weight | 1,57 +/-0,05 gr./cc. |
| Viscosity at time of packaging | 110 K.U. at 25º C |
| Fixed matter % | 60% +/- 2 |
| Volume solids % | 39% +/- 2 |
| Performance | 10 – 12 m2/kg per coat depending on the state of the surface |
| Wet film recommended thickness | 80-100 micras per coat |
| Dry film recommended thickness | 30-35 micras per coat |
| Dry time at touch | 40-60 minutes |
| Curing time | 21 days |
| Recoat | 4 – 6 hours minimum, maximum without limit |
| Diluent | Clean water |
| Conservation | Keep away from extreme temperatures |
| COV’S | Cat A/a (legal limit 30 g/l) max. cont. 30 g/l |
It can be applied on any construction material, cement, plaster, etc. Its application can be brushed, roller or sprayed. Before application the facting must be completely clean and dry. It should not be applied at temperatures below 5º c or above 35º C.
Other Information
 Technical data sheet |
 Safety data sheet
|
 White colour |
Colours according to sample under minimal order of 400 Kgs.
