Anti-corrosive enamel metal finish forging
Non-corrosive enamel. Excellent protection and decoration of any iron surface, which provides a natural metal finish (type forging).
- Easy application.
- Non-crack.
- High adhesion, elasticity and resistance to weathering.
Their colors are mixable. Suitable for all types of metallic structures (private, industrial, urban, etc.) both outside and inside.
| Colour | Black, brown and grey |
| Finishing | Forging aspect and metallic |
| Density | 1,68 -1,79 gr./cc. (According the colour) |
| Fixed material | 78 – 81% in weight |
| Theoric performance | 8 – 12 m2 / lt. according the state of the surface |
| Drying time at touch | 3 – 4 hours |
| Repainting | 24 hours |
| Solvant on formule | Hydrocarbon mixing |
| Packaging | 750 ml and 4 lts. containers |
| Adherence UNE 48032 | Very good |
| Work temperature | Between 15 – 30º C |
| Ignition point | 42º C Seta – Flash Cup closed |
| Salt cavity | 1.000 hours (ASTM-B117 with a fit primer) |
Variations of temperature, humidity, thickness, etc., may cause changes in drying, performance, etc. The surface must be dry and clean, free from grease, dust and dirt. It is recommended to apply at least 2 coats, diluted first so that it penetrates well in wood and the second viscosity of supply. UV inhibitor
Other information
 Technical data sheet |
 Safety data sheet
|
 Black, brown and grey |
Colours according to sample under minimal order of 400 Kgs.
