Medium-gloss satin plastic paint
L/S Satin Plastic Paint is based on emulsions of vinyl copolymers, titanium dioxide and the best fillers, which grant it the following characteristics:
- Waterproof with great weather resistance.
- Very decorative satin finish, forming a single body with the painted surface.
- It produces a good finish. Joints and splices are very well covered. The resulting surface is homogeneous and seamless.
L/S Satin Plastic Paint ensures great waterproofing and excellent decoration, perfect in all environments and climates, indoors and outdoors.
| Colour | White |
| Finish | Silky satin |
| Brightness at 85º C | 30-35% |
| Specific weight | 1,28 +/- 0,05 gr./cc. |
| Viscosity at time of packaging | 95 K.U. at 25º C |
| Fixed matter % | 52% +/- 2 |
| Volume solids % | 40% +/- 2 |
| Performance | 7 – 9 m2/kg per coat depending on the state of the surface |
| Wet film recommended thickness | 95-105 micras per coat |
| Dry film recommended thickness | 43 – 47 micras per coat |
| Dry-to-touch time | 40 – 60 minutes |
| Curing time | 21 days |
| Recoat | 8 – 10 hours minimum. Maximum without limit |
| Thin with | Clean water |
| Presentation | 5 kg, 10 kg and 18 kg cans |
| Conservation | Keep away from extreme temperatures |
| VOC’s | Cat A/b (legal limit 100 g/l). Maximum content 30 g/l |
This product can be used both for interior and exterior. It can be applied to cement, plaster, concrete, brick, stonework, etc.
It can be applied by brush, roller or spray. Surfaces to be painted must be clean and dry. Do not apply when air and surface temperatures are below 5° C or above 35º C.
It can be applied by brush, roller or spray. Surfaces to be painted must be clean and dry. Do not apply when air and surface temperatures are below 5° C or above 35º C.
Other Information
 Technical data sheet |
 Safety data sheet
|
 White Colour |
Other colours available with minimum order of 400 kg.
