Antioxidant primer for protection of metallic elements
It is a antioxidant synthetic primer aimed at the preparation of iron surfaces for cellulosic or synthetic finishes.
| Colour | White, rust red, green, grey and black. |
| Finish | Matt |
| Nature | Alkyd-synthetic |
| Density | 1,5 to 1,7 |
| Relation Pigment/Resin | 0,87 in volume |
| Theorical coverage | 7 to 10 m2/Kg. and hand depending on the surface state. |
| Drying time to the touch | 15-20 minutes |
| Repainting | 8 Hours (cellulosic products wait 24 hors) |
| Volume solids | 40% in weight |
| Non-volatil volume | 60% in weight |
| Pack-sizes | 1 Kg., 5 Kg and 20 Kg. |
| Conservation | Keep protected from extreme temperatures. |
| Tools cleaning | Universal solvent |
Painting surfaces must be prepared in a proper way and clean perfectly.
For new surfaces, it will be necessary to clean, degrease, brush, sand and remove dust
For repainting , in those cases in which is necessary to eliminate totally or partially old paint down to the metal surface, paint remover will have to be used, making sure that there are no remains of oxide and that remaining paint is in good state and attached, and then proceed as if it was a new surface.
Other Information
 Technical data sheet |
 Safety data sheet
|
Colours according to sample under minimal order of 400 Kgs.
