Waterborne Paint for Road Marking
Paints for road marking, with acrylic resins in aqueous dispersion applicable in thick and very fast drying. Essentially suitable for marking of: roads, streets, car parks, etc.
| Colour | White, yellow, red and blue |
| Finishing | Matt medium |
| Specific weight | 1’50 – 1’60 gr. / cc. |
| Viscosity at time of packaging | 95 K.U. to 20 ºC |
| Fixed material | 65 – 63% according the colour |
| Performance | 3’5 m2 / lt to 200 wet microns |
| Drying time | No pick up 20 – 30 minutes to 20ºC |
| Stepable | 21 hours |
| Walkable | 48 hours |
| Repainting | 12 hours |
| Total treat | 7 – 8 days |
| Packaging | 750 ml and 3’5 Lt. containers |
| Type of vehicle | Acrylic resins |
- To shake the product until its perfect homogenization.
- The surfaces must be clean, off dust, nitrate, etc. If it was painted above, take care that the previous paint is in good condition and well attached.
- Can be given by brush, roller or spray.
- Dilution: WATER
- Spray gun “airless”: 0 – 5% maximum.
- Airbrush gun: 0 – 10% maximum.
- Roller: Not to dilute.
- Always apply above 7°C of ambient temperature and the pavement below 40°C and 80% RH.
Otra Información
 Technical data Sheet |
 Safety data sheet
|
 White and grey colours |
Colours according to sample under minimal order of 400 Kgs.
“
