Anti-Condensation Insulating Paint

Anti-condensation insulating paint

Matte plastic paint prevent the cold wal effect

Anti-condensation paint specially designed to reduce the phenomenonthe cold wall effect, which is usually the cause of the appearance of areas blackened by the proliferation of mold.
Condensation moisture occurs when inside a house there is water vapor and comes into contact with cold walls (more pronounced phenomenon in winter)
It also provides a good thermal insulation capability when formulated with glass hollow beads of low thermal conductivity.
Specially suitable for decoration in ceilings and vertical walls inside and outside (plaster, cement, etc.), where there are condensation problems or some thermal insulation is desired.
Non-toxic, with very low odor and non-flammable.

Colour	White
Finish	Slightly textured matte
Specific weight	0.86+/-0,05 gr./cc.
Viscosity on time of packaging	130 K.U. to 25 ºC
Fixed matter %	52% +/- 3
Solid in volume %	60 % +/-3
Performance	1 to 2 m²/kg per coat depending on the state of the surface and the desired thickness
Dry-to-touch time	40 – 60 minutes
Curing time	21 days
Repainted	4 to 6 hours minimum, maximum o limit
Thin with	Clean water
Presentation	750 ml and 4 lt containers
Conservation	Keep away from extreme temperatures
VOC’s	Cat A/a (legal limit 30 g/l). Maximum content 25 g/l

It can be applied on any material of construction: plaster, cement, brick, stone, etc. It can be applied by brush, roller or sprayed. Surfaces to be painted must be completely clean and dry. Do not apply when air and surface temperatures are below 5° C or above 35º C.

Other Information